[j-nsp] MS-DPC export flows have 0 as dest interface
Jim Devane
jdevane at switchnap.com
Tue Aug 10 19:06:27 EDT 2010
RAS,
10.0R2
I opened a case and we will see what happens. I have zero issue with moving to new code if it will solve the issue. This router doesn't do a whole lot (and even less without correct flow reporting)
Thanks,
Jim
-----Original Message-----
From: Richard A Steenbergen [mailto:ras at e-gerbil.net]
Sent: Tuesday, August 10, 2010 4:04 PM
To: Jim Devane
Cc: juniper-nsp at puck.nether.net
Subject: Re: [j-nsp] MS-DPC export flows have 0 as dest interface
On Tue, Aug 10, 2010 at 01:01:48PM -0700, Jim Devane wrote:
>
> However, The Juniper is not reporting the dest interface and instead
> putting in a zero. This is confusing our flow collector (Peakflow SP)
> Arbor takes the dest intf and source interface both being zero as a
> drop. The traffic is not in fact being dropped, however.
>
> Has anyone dealt with this particular or type of problem? I was trying
What code are you running? We had a similar issue a while back, infact
we had a case open on it for over a year before it finally got fixed,
but I'm pretty sure our version of the issue has been fixed for a couple
years now.
--
Richard A Steenbergen <ras at e-gerbil.net> http://www.e-gerbil.net/ras
GPG Key ID: 0xF8B12CBC (7535 7F59 8204 ED1F CC1C 53AF 4C41 5ECA F8B1 2CBC)
More information about the juniper-nsp
mailing list