[j-nsp] IPSEC VPN Issues on SRX3600

Fahad Khan fahad.khan at gmail.com
Wed Aug 18 15:18:40 EDT 2010


Its SRX3600 running in cluster, with Junos version 10.0R3.10 (recommended
one), route based VPN tunnel, remote end device is SSG140

Thanks and regards,
Muhammad Fahad Khan
JNCIP - M/T # 834
IT Specialist
Global Technology Services, IBM
fahad at pk.ibm.com
+92-301-8247638
Skype: fahad-ibm
http://pk.linkedin.com/in/muhammadfahadkhan


On Wed, Aug 18, 2010 at 8:43 PM, Tim Eberhard <xmin0s at gmail.com> wrote:

> Muhammad,
>
> When asking for help it would be worth while to give as much information as
> possible. What type of tunnel? What is the far end of the VPN? What code
> version? Have to searched the PR's for this type of issue?
>
> I will say if it's pre 10.0 I have seen *lots* of ipsec issues and
> behaviors like you are describing. In 10.0 Juniper did a revamp of the vpn
> code/design and things are greatly improved (but by no means bug free).
>
> -Tim Eberhard
>
> On Wed, Aug 18, 2010 at 10:34 AM, Fahad Khan <fahad.khan at gmail.com> wrote:
>
>> Dear Folks,
>>
>> I am running various IPSEC VPN tunnels on SRX, but seeing a strange
>> behavior
>> with 1 or 2 tunnels suddenly, that is the tunnel remains up, but traffic
>> stops passing.
>>
>> has any one experienced this ever?? please share
>>
>> regards,
>>
>> Muhammad Fahad Khan
>> JNCIP - M/T # 834
>> IT Specialist
>> Global Technology Services, IBM
>> fahad at pk.ibm.com
>> +92-301-8247638
>> Skype: fahad-ibm
>> http://pk.linkedin.com/in/muhammadfahadkhan
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>>
>
>


More information about the juniper-nsp mailing list