[j-nsp] COS on st0 interface

Will McLendon wimclend at gmail.com
Mon Aug 23 14:48:32 EDT 2010


As far as I know, you can not do any COS on st0 interfaces yet, and I haven't seen a timeframe for when.  I've seen mention of using Virtual Channels for this (whatever those are), but I THINK that might be J-series only, and i've never seen a working config of it -- only references on slide decks about the limitation of no COS on st0.


Will



> Date: Mon, 23 Aug 2010 14:24:15 +0500
> From: Fahad Khan <fahad.khan at gmail.com>
> To: juniper-nsp at puck.nether.net
> Subject: [j-nsp] COS on st0 interface
> Message-ID:
> 	<AANLkTim8YGeV6xX1Xo85ZN2gHRH_reNZ38H4v57t_Kmi at mail.gmail.com>
> Content-Type: text/plain; charset=ISO-8859-1
> 
> Hi Folks,
> 
> I need to implement COS on tunnel interface on SRX3600 device . Bandwidth
> limit is done by policer called in filter (one options). A filter cannot be
> applied on st0 interface.
> 
> any solution?? or work arround?
> 
> regards,
> 
> Muhammad Fahad Khan
> JNCIP - M/T # 834
> IT Specialist
> Global Technology Services, IBM
> fahad at pk.ibm.com
> +92-301-8247638
> Skype: fahad-ibm
> http://pk.linkedin.com/in/muhammadfahadkhan
> 
> 
> ------------------------------
> 
> _______________________________________________
> juniper-nsp mailing list
> juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
> 
> End of juniper-nsp Digest, Vol 93, Issue 35
> *******************************************




More information about the juniper-nsp mailing list