[j-nsp] SRX-3600 Rate limit

[atif naeem]

Hi Ben,
I configured as per given configuration but i am getting message this is not
supported on SRX-3600.

policer rate-limit-1mb {
    if-exceeding {
        bandwidth-limit 1m;
        burst-size-limit 124k;
    }
    then discard;
}
filter test {
    term 1 {
        from {
            source-address {
                0.0.0.0/0;
            }
        }
        then {
            ##
            ## Warning: statement ignored: unsupported platform (srx3600)
            ##
            policer rate-limit-1mb;
            accept;
        }
    }
}

BR
Atif Naeem

On Wed, Dec 1, 2010 at 2:46 AM, DeathPacket <deathpacket at gmail.com> wrote:

> Atif,
>
> I put this together to limit itunes traffic to 1mb.
>
> Use a firewall filter to police the traffic (I did specify www.apple.combut it resolved the address automatically, this may be an issue when round
> robin DNS happens). You can more specific (i.e. Port 80 etc..) but I was
> just checking base functionality.
>
>
> firewall {
>     policer Apple {
>         if-exceeding {
>             bandwidth-limit 1m;
>             burst-size-limit 50k;
>         }
>         then discard;
>     }
>     filter Apple-Rate-Limit {
>         term 1 {
>             from {
>                 destination-address {
>                     184.85.45.15/32;
>                 }
>             }
>             then {
>                 policer Apple;
>                 accept;
>             }
>         }
>         term 2 {
>             then accept;
>         }
>     }
> }
>
>
> Then add the filter to an interface: (this is my trust interface)
>
>
>     fe-0/0/7 {
>         unit 0 {
>             family inet {
>                 filter {
>                     input-list Apple-Rate-Limit;
>                 }
>                 address 192.168.200.238/24;
>             }
>         }
>     }
>
> --Ben
>
> On Tue, Nov 30, 2010 at 10:11 AM, atif naeem <col.atif at gmail.com> wrote:
>
>> Hi folks ,
>> Can any one tell me how to implement rate limit on SRX-3600 .I have junos
>> version 10.0R2.10 . i want to restrict user on 1mb.
>>
>> BR
>> Atif Naeem
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>>
>
>