[j-nsp] l2tp sessions on MX

[Mauritz Lewies]

Hi There

I have a customer that wants to build L2TP sessions from CE routers to a PE device in order to gain access to a VRF.

I've done this before on Cisco's but I'm not sure if it can be done on a Juniper MX.

Can anyone help with the following:
1. Can it be done on a MX (Rel 10.3)
2. What is the Junos config to do this (template, radius etc etc]
3. What are the Radius AV pairs in order to create a framed interface, connected to a VRF and some static routes?

Any help will be greatly appreciated..

Regards