[j-nsp] JNCIP lab exam

[spunkmeyer]

Hi Raheel,

In JNCIP exam, there is topic about interface such as  ATM, Frame Relay..etc..
How you come up to study this topic? 
Is there any way to simulate em or fxp interface to act like ATM or Frame relay interface?

Regards,
WS
Regards,
WS

-----Original Message-----
From: Raheel Muhammad <raheel.muhammad at gmail.com>
Sender: juniper-nsp-bounces at puck.nether.net
Date: Mon, 20 Dec 2010 15:53:49 
To: Gökhan Gümüş<ggumus at gmail.com>
Cc: <juniper-nsp at puck.nether.net>
Subject: Re: [j-nsp] JNCIP lab exam

Hi,

Its not an issue, you can even work with 2 GB of RAM with DUAL core 1.7 GHZ
processors thats how i prepared for it. NO need for any ethernet cards. I
build a lab on Windiws XP.

Regards,
Raheel Muhammad

On Mon, Dec 20, 2010 at 3:40 PM, Gökhan Gümüş <ggumus at gmail.com> wrote:

> Hi all,
>
> I have recently decided to prepare for JNCIP lab exam.
> Since real hardwares are pretty expensive,i would like to build up a home
> lab with OLIVE on Windows/Ubuntu.
>
> Could anyone help me how to install it?
> What are the hardware requirement? ( RAM,HD,Ethernet card...etc)
>
> Basically how many ethernet card do i need to simulate/connect seven
> juniper
> router as basically shown in the JNCIP lab topology in JNCIP book?
>
> Thanks,
> Gokhan
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp