[j-nsp] Need suggestions..

[vvasilev at vvasilev.net]

Hello,

I've got one M7i (RE-400 & 768MB Ram) running JunOS 9.6R2 and dealing with more than 900,000 prefixes. Memory utilisation is at %92. I've been monitoring it for more than 4 months and I've never had any troubles.

Regards,
Vladislav

------Original Message------
From: TCIS List Acct
Sender: juniper-nsp-bounces at puck.nether.net
To: NSP Juniper
Subject: Re: [j-nsp] Need suggestions..
Sent: 4 Feb 2010 16:26

We have 4 M7i's with RE-400's and 768M RAM and have never had a problem with 
taking full routes (we are at 55% memory usage right now).

With all of the comments on this topic, should we be worried?

Our units push ~200Mbit traffic, so they are nowhere near capacity CPU wise.

> I can confirm your worry about the RE-850.
> 
> We had one box with a full Internet table (~310K prefixes) *and* a
> reasonable number of L3VPNs with a total of ~160K prefixes, *and* a
> high number of interfaces. This box needed enough RE memory that we
> started seeing swap usage. Not good.
> 
> Now the box has a reduced Internet table, and is happy.
> 
> Steinar Haug, Nethelp consulting, sthaug at nethelp.no
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp

-- 

-----------------------------------------
Mike Bacher / listacct at tulsaconnect.com
TCIS - TulsaConnect Internet Services
http://www.tulsaconnect.com
-----------------------------------------
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp


Sent using BlackBerry® from Orange