[j-nsp] Peering with loopback

[David Coulson]

Bill-

JunOS supports a 'local-address' statement within a neighbor or BGP 
group, which is pretty much the same as update-source on cisco, although 
it uses an IP rather than interface name.

David

On 2/4/2010 12:07 PM, Bill Blackford wrote:
> I'm running a mixed environment of Juniper and Cisco and have noticed some odd behavior with some of iBGP peers. It's my understanding that Junos has no equivalent to the Cisco 'update-source loobback0'. I haven't run into to problems peering with the respective loopback between a Cisco to Juniper but have with a Juniper to Juniper (that is attempting to bring the peers up via the loopbacks). Although my tests were limited and lack too many details, I'm curious if anyone has run up against this issue and what your recommendations are.
>
> Thank you,
>
> -b
>
> --
> Bill Blackford
> Senior Network Engineer
> Technology Systems Group
> Northwest Regional ESD
>
> this message was composed using 100% recycled electrons
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>