[j-nsp] EX 3200 - no arp entries after power failure

[Kevin Oberman]

> From: Paul Waller <wallerp_7 at hotmail.com>
> Date: Tue, 9 Feb 2010 06:33:52 +1000
> Sender: juniper-nsp-bounces at puck.nether.net
> 
> 
> I'm wondering if anybody has seen this issue before.  We have a EX
> 3200 running JunOS 9.2R2 release.  Everytime the switch looses power
> it boots back up OK but no ARP entries are seen.  I haven't had a
> chance to see the logs yet but I'm informed this has been happening
> for sometime & a 2nd reboot of the switch fixes the problem.
> 
>  
> 
> Once I look at the config & get the logs then I might post some more
> but I thought I'd just post this question just in cast somebody had
> seen this issue before.

This is a known issue with 9.2 and is fixed in newer versions. We hit
the same problem and had to enter static ARP entries.

The problem is fixed in any remotely current release of JunOS for the EX
boxes.
-- 
R. Kevin Oberman, Network Engineer
Energy Sciences Network (ESnet)
Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab)
E-mail: oberman at es.net			Phone: +1 510 486-8634
Key fingerprint:059B 2DDF 031C 9BA3 14A4  EADA 927D EBB3 987B 3751