[j-nsp] J2320 as BGP router
Niels Raijer
niels at fusix.nl
Thu Feb 18 09:53:56 EST 2010
Op 18 feb 2010, om 10:52 heeft Morten Isaksen het volgende geschreven:
> As far as I am told it is 2 Gig now. Juniper has just not updated the
> spec on the web.
Correct, a J2320 can have 2 GB of RAM:
niels at nikhef-1> show chassis routing-engine
Routing Engine status:
Temperature 39 degrees C / 102 degrees F
CPU temperature 40 degrees C / 104 degrees F
DRAM 2048 MB
Memory utilization 52 percent
CPU utilization:
User 0 percent
Real-time threads 21 percent
Kernel 2 percent
Idle 77 percent
Model RE-J2320-2000
Other than that, this router (along with another J2320 router with 2 GB RAM, and soon to be three more) holds just over a million routes just fine:
Table Tot Paths Act Paths Suppressed History Damp State Pending
inet.0 995511 308800 0 0 0 0
inet6.0 10670 2594 0 0 0 0
It has three and a half full IPv4 tables and three full IPv6 tables, and more than enough memory to spare as you can see above.
We normally run about 60 Mbps of IMIX through this box but we have seen times where it exceeded 100 Mbps without any sweat at all.
--
Niels Raijer
niels at fusix.nl
http://fusix.nl
More information about the juniper-nsp
mailing list