[j-nsp] LFM failure detection

[Fahad Aqeel]

Hi experts
 How i verify LFM failure detection time in JUNOS?
I enable traceoption but not find any failure time.
config and output given below.

[edit protocols oam ethernet link-fault-management]
jnpr at M320.2# show 
traceoptions {
    file LFM;
    flag all
}
interface ge-0/2/0 {
    pdu-interval 100;
    link-discovery active;
    pdu-threshold 3;
}



jnpr at M320.2# run show oam ethernet link-fault-management brief    
  Interface: ge-0/2/0
    Status: Running, Discovery state: Send Any
    Peer address: 00:e0:fc:88:60:b4
    Flags:Remote-Stable Remote-State-Valid Local-Stable 0x50
    Remote entity information:
      Remote MUX action: forwarding, Remote parser action: forwarding
      Discovery mode: active, Unidirectional mode: supported
      Remote loopback mode: supported, Link events: supported
      Variable requests: unsupported


Thanks
FAS
 		 	   		  
_________________________________________________________________
Hotmail: Powerful Free email with security by Microsoft.
http://clk.atdmt.com/GBL/go/201469230/direct/01/