[j-nsp] Managing MX480 fxp0

[Derick Winkworth]

We put a router in place to do NAT for the local subnet of the fxp.

Alternately, you can just put static routes in for specific management subnets 
pointing out the fxp port...




________________________________
From: Serge Vautour <sergevautour at yahoo.ca>
To: Chen Jiang <ilovebgp4 at gmail.com>; Jim Devane <jdevane at switchnap.com>
Cc: "juniper-nsp at puck.nether.net" <juniper-nsp at puck.nether.net>
Sent: Thu, July 8, 2010 10:26:24 AM
Subject: Re: [j-nsp] Managing MX480 fxp0

Putting fxp0 in a LS works from a routing perspective but it breaks NSR & GRES - 

at least it does in 10.0R2. I have a JTAC case pending.

Serge



----- Original Message ----
From: Chen Jiang <ilovebgp4 at gmail.com>
To: Jim Devane <jdevane at switchnap.com>
Cc: "juniper-nsp at puck.nether.net" <juniper-nsp at puck.nether.net>
Sent: Thu, July 8, 2010 4:54:15 AM
Subject: Re: [j-nsp] Managing MX480 fxp0

You cannot put fxp0 into VRF but could put it into a logical system. And
logical system also have a seperate routing table other than inet.0.



On Thu, Jul 8, 2010 at 3:16 AM, Jim Devane <jdevane at switchnap.com> wrote:

> Hello,
>
> I need some ideas/help on a scenario I am sure comes up a lot but having
> problems with.
>
> I have an MX480. I want to be able to manage this MX from an internal
> (1918) network through the fxp0 port. The internal network is not flat but
> routed and there are several subnets which may contact the MX for
> management/polling. I was thinking/hoping to set up a VRF for this port and
> set routes/default route for the VRF to connect. It turns out I am not able
> to put fxp0 into a routing-instance. (errors on config checkout)
> So I put everything production in to a logical system leaving the fxp in
> the master instance and installing a default route for the master instance.
> This works, but now the MS-DPC will not export flows if it is in a logical
> system. So the logical system is out b/c the MS-DPC has to be in the master
> instance. But I can't but the fxp0 into a logical/routing instance.
>
> What is the BCP/recommended method for managing this box if fxp0 is not a
> "public" routed interface?
>
> Unfortunately, I don't have another port to place into a VRF besides the
> fxp0 (all other ports are 10G)
>
> Thanks for any help/ideas!
> Jim
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>



-- 
BR!



          James Chen
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp



_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp