[j-nsp] Juniper RANCID

[ck]

your output is expected behavior. jlogin is just an expect script that logs
into the devices.

if you're configuration is complete (with cron job/etc and you just want to
test you can run the following /blah/blah/rancid/bin/rancid-run to run
rancid

-ck



On Thu, Jul 15, 2010 at 4:53 PM, Stefan Schlesinger <sts at ono.at> wrote:

> Hello Folks,
>
> I'm trying to get RANCID to work with jlogin on my SRX100. I
> configured my router.db and .cloginrc. The following command
> can login to the router, but it doesn't backup anything.
>
>        $ bin/jlogin -f .cloginrc 192.168.0.13
>
>
> I'm running rancid 2.3.3, and here are my configuration files:
>
> .cloginrc
>        add password 192.168.0.* pwdstring
>        add user     192.168.0.* rancid
>        add method   192.168.0.* {ssh}
> --
>
> var/noc/router.db:
>        192.168.0.13:juniper:up
> --
>
> The following happens when i run the command line from above:
>
>
> $ bin/jlogin -f .cloginrc 192.168.0.13
>        spawn ssh -c 3des -x -l rancid 192.168.0.13
>        rancid at 192.168.0.13's password:
>        --- JUNOS 10.1R3.7 built 2010-07-10 08:32:02 UTC
>        rancid at juniper-01>
>
>        rancid at juniper-01>
>
>
>
> Maybe someone on the list could provide me with some advice on how
> to get that working.
>
> Regards, Stefan.
>
> --
> Stefan Schlesinger ////////////////////////////////////////// ///////
> sts at ono.at
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>