[j-nsp] Juniper MX80 IRB

[Addy Mathur]

On Tuesday, July 27, 2010, Tim Vollebregt <tim at interworx.nl> wrote:
>
> On Jul 26, 2010, at 11:25 PM, Chuck Anderson wrote:
>
>> On Mon, Jul 26, 2010 at 06:52:14PM +0200, Tim Vollebregt wrote:
>>> We have just received a Juniper MX80 and are building the configuration.
>>> The machine is running Junos 10.2 R1.8
>>>
>>> The issue we are experiencing is that the IRB interface seems to be
>>> not working, although it seems to be configured correctly.
>>> Configuration:
>>
>> Try configuring it the old 9.2 way and let us know if it works:
>>
>> ge-1/0/0 {
>>       unit 200 {
>>           encapsulation vlan-bridge;
>>            vlan-id 200;
>>
>> irb {
>>        unit 200 {
>>            family inet {
>>                address x.x.x.x/27;
>>                address x.x.x.x/29;
>>
>> bridge-domains {
>>    VLAN200 {
>>        domain-type bridge;
>>        vlan-id 200;
>>       interface ge-1/0/0.200;
>>        routing-interface irb.200;
>>
>> Thanks.
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>
>
> Hi Chuck,
>
> I'm getting errors when changing to this configuration. It is only possible to use encapsulation vlan-bridge on unit 0. And when I change it to unit 0:
>
> <message>VLAN Encapsulation: Not allowed on untagged interfaces</message>
> </xnm:error>
>
> <source-daemon>dcd</source-daemon>
> <edit-path>[edit interfaces ge-1/0/0]</edit-path>
> <statement>unit 0</statement>
> <message> invalid encapsulation</message>
> </xnm:error>
> error: configuration check-out failed
>
> This issue seems to be really strange as we have it working the 10.x way on another router. When I configure Ge-1/0/0 as a routed interface it works fine.
>
> Regards,
>
> Tim
>
>
>
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>

Tim:

Could you please paste in your entire ge-1/0/0 interface and
bridge-domain VLAN200 configuration at the time you do get the commit
error?

Thanks,
Addy.