[j-nsp] Need to run "request system snapshot" from an external 500Meg CF to the 1000Meg internal CF

[Stefan Fouant]

> -----Original Message-----
> From: juniper-nsp-bounces at puck.nether.net [mailto:juniper-nsp-
> bounces at puck.nether.net] On Behalf Of Fred Jordan
> Sent: Friday, July 30, 2010 1:29 PM
> To: juniper-nsp at puck.nether.net
> Subject: [j-nsp] Need to run "request system snapshot" from an external
> 500Meg CF to the 1000Meg internal CF
> 
> Due to pilot error, I have a J2350 running Junos 10.0R2.10 , booting
> from the external compact flash. The internal cf is new, blank, and not
> partitioned.
> I'm not sure what parameters to pass to "request system snapshot" to
> have the internal cf partitioned and formatted correctly. I'm hoping to
> not have to
> visit the router to change the cf cards around, since what I want to
> end
> up with is with the 1gig cf in the internal cf slot. It is the size I
> need to specify for the
> config, data, swap, and root partitions that has me mostly confused.

Whenever I've had to do a request system snapshot I've never had to specify
the partition sizes...  Did you try doing it without specifying all that
mumbo?

Stefan Fouant, CISSP, JNCIEx2
www.shortestpathfirst.net
GPG Key ID: 0xB5E3803D