[j-nsp] Logical-Systems Management SNMP
Gabriel Farias
gabrielfarias03 at gmail.com
Thu Jun 17 16:16:15 EDT 2010
Hi friends,
I used the following configuration, but I'm having error and the server
database can not read the information via snmp.
Do you have any hint of what is happening?
thanks
*Attempting Server*:
sa19rb1:/ # ping 10.251.42.230 -n 4
PING 10.251.42.230: 64 byte packets
64 bytes from 10.251.42.230: icmp_seq=0. time=1. ms
64 bytes from 10.251.42.230: icmp_seq=1. time=1. ms
64 bytes from 10.251.42.230: icmp_seq=2. time=1. ms
64 bytes from 10.251.42.230: icmp_seq=3. time=1. ms
----10.251.42.230 PING Statistics----
4 packets transmitted, 4 packets received, 0% packet loss
round-trip (ms) min/avg/max = 1/1/1
sa19rb1:/ # snmpwalk 10.251.42.230 system
snmpwalk: No response arrived before timeout.
*Configure used*
{master}[edit]
qos at IXR01RJO# show snmp
community XPTO {
authorization read-only;
logical-system RT30RJO {
routing-instance manager-snmp;
}
}
trap-options {
logical-system RT30RJO {
routing-instance manager-snmp {
source-address 10.251.42.230;
}
}
}
routing-instance-access;
traceoptions {
file debug-snmp;
flag all;
}
{master}[edit]
qos at IXR01RJO# run monitor start debug-snmp
*ERROR*:
{master}[edit]
qos at IXR01RJO#
*** debug-snmp ***
Jun 17 16:35:28 snmpd[5709] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Jun 17 16:35:28 snmpd[5709] >>> Get-Next-Request
Jun 17 16:35:28 snmpd[5709] >>> Source: 10.31.0.236
Jun 17 16:35:28 snmpd[5709] >>> Destination: 10.251.42.230
Jun 17 16:35:28 snmpd[5709] >>> Version: SNMPv1
Jun 17 16:35:28 snmpd[5709] >>> Request_id: 0x5709
Jun 17 16:35:28 snmpd[5709] >>> Community: XPTO
Jun 17 16:35:28 snmpd[5709] >>> Error: status=0 / vb_index=0
Jun 17 16:35:28 snmpd[5709] >>> OID : system
Jun 17 16:35:28 snmpd[5709] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Jun 17 16:35:28 SNMPD_AUTH_RESTRICTED_ADDRESS: nsa_initial_callback: request
from address 10.31.0.236 not allowed
Jun 17 16:35:28 SNMPD_AUTH_FAILURE: nsa_initial_embedcomm: unauthorized SNMP
community from 10.31.0.236 to unknown community name (XPTO)
Jun 17 16:35:28 ns_trap_internal
Jun 17 16:35:28 ns_trap_internal
Jun 17 16:35:29 snmpd[5709] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Jun 17 16:35:29 snmpd[5709] >>> Get-Next-Request
Jun 17 16:35:29 snmpd[5709] >>> Source: 10.31.0.236
Jun 17 16:35:29 snmpd[5709] >>> Destination: 10.251.42.230
Jun 17 16:35:29 snmpd[5709] >>> Version: SNMPv1
Jun 17 16:35:29 snmpd[5709] >>> Request_id: 0x5709
Jun 17 16:35:29 snmpd[5709] >>> Community: XPTO
Jun 17 16:35:29 snmpd[5709] >>> Error: status=0 / vb_index=0
Jun 17 16:35:29 snmpd[5709] >>> OID : system
Jun 17 16:35:29 snmpd[5709] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Jun 17 16:35:29 SNMPD_AUTH_RESTRICTED_ADDRESS: nsa_initial_callback: request
from address 10.31.0.236 not allowed
Jun 17 16:35:29 SNMPD_AUTH_FAILURE: nsa_initial_embedcomm: unauthorized SNMP
community from 10.31.0.236 to unknown community name (XPTO)
Jun 17 16:35:32 snmpd[5709] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Jun 17 16:35:32 snmpd[5709] >>> Get-Next-Request
Jun 17 16:35:32 snmpd[5709] >>> Source: 10.31.0.236
Jun 17 16:35:32 snmpd[5709] >>> Destination: 10.251.42.230
Jun 17 16:35:32 snmpd[5709] >>> Version: SNMPv1
Jun 17 16:35:32 snmpd[5709] >>> Request_id: 0x5709
Jun 17 16:35:32 snmpd[5709] >>> Community: XPTO
Jun 17 16:35:32 snmpd[5709] >>> Error: status=0 / vb_index=0
Jun 17 16:35:32 snmpd[5709] >>> OID : system
Jun 17 16:35:32 snmpd[5709] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Jun 17 16:35:32 SNMPD_AUTH_RESTRICTED_ADDRESS: nsa_initial_callback: request
from address 10.31.0.236 not allowed
Jun 17 16:35:32 SNMPD_AUTH_FAILURE: nsa_initial_embedcomm: unauthorized SNMP
community from 10.31.0.236 to unknown community name (XPTO)
Tranks
Gabriel Farias
2010/6/10 Gabriel Farias <gabrielfarias03 at gmail.com>
> Dear friends,
>
>
> I have a router model M10i Junos 9.6R1.13 running and is working with
> three-logical systems (LS1, LS2 and LS3), I need to manage all logical
> systems using SNMP, the best way?
>
>
>
> *I am using the command*:
>
>
>
> set snmp community <name-community> logical-system <name-system>
>
>
>
> In addition to this command that is needed?
>
>
>
> Thanks,
>
> Gabriel Farias
>
>
>
More information about the juniper-nsp
mailing list