[j-nsp] Logical-Systems Management SNMP

Dan Farrell danno at appliedi.net
Thu Jun 17 16:41:08 EDT 2010


You might also want to try from your server-

# snmpwwalk -c XPTO 10.251.42.230 system


Dan
-----Original Message-----
From: Dan Farrell 
Sent: Thursday, June 17, 2010 4:39 PM
To: 'Gabriel Farias'; juniper-nsp at puck.nether.net; juniper-nsp-bounces at puck.nether.net
Subject: RE: [j-nsp] Logical-Systems Management SNMP

# set snmp community XPTO clients 10.31.0.236

Dan

-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Gabriel Farias
Sent: Thursday, June 17, 2010 4:16 PM
To: juniper-nsp at puck.nether.net; juniper-nsp-bounces at puck.nether.net
Subject: Re: [j-nsp] Logical-Systems Management SNMP

Hi friends,

I used the following configuration, but I'm having error and the server database can not read the information via snmp.



Do you have any hint of what is happening?

thanks



*Attempting Server*:

sa19rb1:/ # ping 10.251.42.230 -n 4

PING 10.251.42.230: 64 byte packets

64 bytes from 10.251.42.230: icmp_seq=0. time=1. ms

64 bytes from 10.251.42.230: icmp_seq=1. time=1. ms

64 bytes from 10.251.42.230: icmp_seq=2. time=1. ms

64 bytes from 10.251.42.230: icmp_seq=3. time=1. ms

----10.251.42.230 PING Statistics----

4 packets transmitted, 4 packets received, 0% packet loss

round-trip (ms)  min/avg/max = 1/1/1



sa19rb1:/ # snmpwalk 10.251.42.230 system

snmpwalk: No response arrived before timeout.



*Configure used*

{master}[edit]

qos at IXR01RJO# show snmp

community XPTO {

    authorization read-only;

    logical-system RT30RJO {

        routing-instance manager-snmp;

    }

}

trap-options {

    logical-system RT30RJO {

        routing-instance manager-snmp {

            source-address 10.251.42.230;

        }

    }

}

routing-instance-access;

traceoptions {

    file debug-snmp;

    flag all;

}

{master}[edit]

qos at IXR01RJO# run monitor start debug-snmp


*ERROR*:


{master}[edit]

qos at IXR01RJO#

*** debug-snmp ***

Jun 17 16:35:28 snmpd[5709] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

Jun 17 16:35:28 snmpd[5709] >>> Get-Next-Request

Jun 17 16:35:28 snmpd[5709] >>>  Source:      10.31.0.236

Jun 17 16:35:28 snmpd[5709] >>>  Destination: 10.251.42.230

Jun 17 16:35:28 snmpd[5709] >>>  Version:     SNMPv1

Jun 17 16:35:28 snmpd[5709] >>>  Request_id:  0x5709

Jun 17 16:35:28 snmpd[5709] >>>  Community:   XPTO

Jun 17 16:35:28 snmpd[5709] >>>  Error:       status=0 / vb_index=0

Jun 17 16:35:28 snmpd[5709] >>>   OID  : system

Jun 17 16:35:28 snmpd[5709] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

Jun 17 16:35:28 SNMPD_AUTH_RESTRICTED_ADDRESS: nsa_initial_callback: request from address 10.31.0.236 not allowed

Jun 17 16:35:28 SNMPD_AUTH_FAILURE: nsa_initial_embedcomm: unauthorized SNMP community from 10.31.0.236 to unknown community name (XPTO)

Jun 17 16:35:28 ns_trap_internal

Jun 17 16:35:28 ns_trap_internal

Jun 17 16:35:29 snmpd[5709] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

Jun 17 16:35:29 snmpd[5709] >>> Get-Next-Request

Jun 17 16:35:29 snmpd[5709] >>>  Source:      10.31.0.236

Jun 17 16:35:29 snmpd[5709] >>>  Destination: 10.251.42.230

Jun 17 16:35:29 snmpd[5709] >>>  Version:     SNMPv1

Jun 17 16:35:29 snmpd[5709] >>>  Request_id:  0x5709

Jun 17 16:35:29 snmpd[5709] >>>  Community:   XPTO

Jun 17 16:35:29 snmpd[5709] >>>  Error:       status=0 / vb_index=0

Jun 17 16:35:29 snmpd[5709] >>>   OID  : system

Jun 17 16:35:29 snmpd[5709] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

Jun 17 16:35:29 SNMPD_AUTH_RESTRICTED_ADDRESS: nsa_initial_callback: request from address 10.31.0.236 not allowed

Jun 17 16:35:29 SNMPD_AUTH_FAILURE: nsa_initial_embedcomm: unauthorized SNMP community from 10.31.0.236 to unknown community name (XPTO)

Jun 17 16:35:32 snmpd[5709] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

Jun 17 16:35:32 snmpd[5709] >>> Get-Next-Request

Jun 17 16:35:32 snmpd[5709] >>>  Source:      10.31.0.236

Jun 17 16:35:32 snmpd[5709] >>>  Destination: 10.251.42.230

Jun 17 16:35:32 snmpd[5709] >>>  Version:     SNMPv1

Jun 17 16:35:32 snmpd[5709] >>>  Request_id:  0x5709

Jun 17 16:35:32 snmpd[5709] >>>  Community:   XPTO

Jun 17 16:35:32 snmpd[5709] >>>  Error:       status=0 / vb_index=0

Jun 17 16:35:32 snmpd[5709] >>>   OID  : system

Jun 17 16:35:32 snmpd[5709] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

Jun 17 16:35:32 SNMPD_AUTH_RESTRICTED_ADDRESS: nsa_initial_callback: request from address 10.31.0.236 not allowed

Jun 17 16:35:32 SNMPD_AUTH_FAILURE: nsa_initial_embedcomm: unauthorized SNMP community from 10.31.0.236 to unknown community name (XPTO)


Tranks

Gabriel Farias


2010/6/10 Gabriel Farias <gabrielfarias03 at gmail.com>

> Dear friends,
>
>
> I have a router model M10i Junos 9.6R1.13 running and is working with 
> three-logical systems (LS1, LS2 and LS3), I need to manage all logical 
> systems using SNMP, the best way?
>
>
>
> *I am using the command*:
>
>
>
> set snmp community <name-community> logical-system <name-system>
>
>
>
> In addition to this command that is needed?
>
>
>
> Thanks,
>
> Gabriel Farias
>
>
>
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp



More information about the juniper-nsp mailing list