[j-nsp] unabel to archive to ftp

Nick Ryce Nick.Ryce at lumison.net
Thu Jun 24 11:42:52 EDT 2010


Hi Guys,

I have transfer-on-commit to an ftp site bit it just doesn't seem to work.  The username and password have been tested as working

   archival {
        configuration {
            transfer-on-commit;
            archive-sites {
                "ftp://xxx:yyy@ftp.domain.com/juniper/";
            }
        }

When running the commit with | display detail is does not look like it is trying to connect.  Im running 9.6R3.8

Below is the output of the commit

2010-06-24 16:34:58 BST: no commit script changes
2010-06-24 16:34:58 BST: no transient commit script changes
2010-06-24 16:34:58 BST: finished loading commit script changes
2010-06-24 16:34:58 BST: exporting juniper.conf
2010-06-24 16:34:58 BST: expanding groups
2010-06-24 16:34:58 BST: finished expanding groups
2010-06-24 16:34:58 BST: setup foreign files
2010-06-24 16:34:58 BST: update license counters
2010-06-24 16:34:58 BST: finish license counters
2010-06-24 16:34:58 BST: propagating foreign files
2010-06-24 16:34:58 BST: complete foreign files
2010-06-24 16:34:58 BST: dropping unchanged foreign files
2010-06-24 16:34:58 BST: executing 'ffp propagate'
2010-06-24 16:34:58 BST: daemons checking new configuration
2010-06-24 16:34:58 BST: Routing protocols process checking new configuration
2010-06-24 16:34:58 BST: IPSec Key Management daemon checking new configuration
2010-06-24 16:34:58 BST: Interface control process checking new configuration
2010-06-24 16:34:58 BST: Management Information Base II process checking new configuration
2010-06-24 16:34:58 BST: Virtual Router Redundancy Protocol process checking new configuration
2010-06-24 16:34:58 BST: Packet Forwarding Engine management process checking new configuration
2010-06-24 16:34:58 BST: Traffic sampling control process checking new configuration
2010-06-24 16:34:59 BST: Port forwarding process checking new configuration
2010-06-24 16:34:59 BST: Dynamic Host Configuration Protocol process checking new configuration
2010-06-24 16:34:59 BST: Redundancy interface management process checking new configuration
2010-06-24 16:34:59 BST: Connectivity fault management process checking new configuration
2010-06-24 16:34:59 BST: Dial-Out On Demand process checking new configuration
2010-06-24 16:34:59 BST: Integrated Services Digital Network process checking new configuration
2010-06-24 16:34:59 BST: Autoinstallation process checking new configuration
2010-06-24 16:34:59 BST: Network security daemon checking new configuration
2010-06-24 16:34:59 BST: WAN acceleration process checking new configuration
2010-06-24 16:34:59 BST: Layer 2 address flooding and learning process checking new configuration
2010-06-24 16:34:59 BST: Multicast Snooping process checking new configuration
2010-06-24 16:34:59 BST: Ethernet Switching Process checking new configuration
2010-06-24 16:34:59 BST: commit wrapup...
2010-06-24 16:34:59 BST: activating '/var/etc/keyadmin.conf'
2010-06-24 16:34:59 BST: activating '/var/etc/ifinfo.conf'
2010-06-24 16:34:59 BST: activating '/var/etc/certs'
2010-06-24 16:34:59 BST: activating '/var/etc/cosd.conf.id'
2010-06-24 16:34:59 BST: executing foreign_commands
2010-06-24 16:34:59 BST: /bin/sh /etc/rc.ui ui_setup_users (sh)
2010-06-24 16:34:59 BST: executing ui_commit in rc.ui
2010-06-24 16:35:02 BST: executing 'ffp activate'
2010-06-24 16:35:02 BST: copying configuration to juniper.save
2010-06-24 16:35:02 BST: activating '/var/run/db/juniper.data'
2010-06-24 16:35:02 BST: notifying daemons of new configuration
2010-06-24 16:35:02 BST:  notifying rpd(2)
2010-06-24 16:35:02 BST: signaling 'Routing protocols process', pid 845, signal 1, status 0 with notification errors enabled
2010-06-24 16:35:02 BST:  notifying kmd(8)
2010-06-24 16:35:02 BST: signaling 'IPSec Key Management daemon', pid 853, signal 1, status 0 with notification errors enabled
2010-06-24 16:35:02 BST:  notifying dcd(12)
2010-06-24 16:35:02 BST: signaling 'Interface control process', pid 872, signal 1, status 0 with notification errors enabled
2010-06-24 16:35:02 BST:  notifying mib2d(14)
2010-06-24 16:35:02 BST: signaling 'Management Information Base II process', pid 870, signal 1, status 0 with notification errors enabled
2010-06-24 16:35:02 BST:  notifying vrrpd(16)
2010-06-24 16:35:02 BST: cannot signal 'Virtual Router Redundancy Protocol process', signal 1, no pid
2010-06-24 16:35:02 BST:  notifying pfed(18)
2010-06-24 16:35:02 BST: signaling 'Packet Forwarding Engine management process', pid 869, signal 1, status 0 with notification errors enabled
2010-06-24 16:35:02 BST:  notifying sampled(21)
2010-06-24 16:35:02 BST: signaling 'Traffic sampling control process', pid 847, signal 1, status 0 with notification errors enabled
2010-06-24 16:35:02 BST:  notifying fud(28)
2010-06-24 16:35:02 BST: cannot signal 'Port forwarding process', signal 1, no pid
2010-06-24 16:35:02 BST:  notifying dhcpd(38)
2010-06-24 16:35:02 BST: cannot signal 'Dynamic Host Configuration Protocol process', signal 1, no pid
2010-06-24 16:35:02 BST:  notifying cfmd(49)
2010-06-24 16:35:02 BST: cannot signal 'Connectivity fault management process', signal 1, no pid
2010-06-24 16:35:02 BST:  notifying jdhcpd(50)
2010-06-24 16:35:02 BST: cannot signal 'Dynamic Host Configuration Protocol process', signal 1, no pid
2010-06-24 16:35:02 BST:  notifying dood(73)
2010-06-24 16:35:02 BST: cannot signal 'Dial-Out On Demand process', signal 1, no pid
2010-06-24 16:35:02 BST:  notifying isdnd(74)
2010-06-24 16:35:02 BST: cannot signal 'Integrated Services Digital Network process', signal 1, no pid
2010-06-24 16:35:02 BST:  notifying tgmd(75)
2010-06-24 16:35:02 BST: signaling 'Telephony Gateway Module process', pid 829, signal 1, status 0 with notification errors enabled
2010-06-24 16:35:02 BST:  notifying autod(76)
2010-06-24 16:35:02 BST: cannot signal 'Autoinstallation process', signal 1, no pid
2010-06-24 16:35:02 BST:  notifying nsd(78)
2010-06-24 16:35:02 BST: signaling 'Network security daemon', pid 866, signal 1, status 0 with notification errors enabled
2010-06-24 16:35:02 BST:  notifying wxd(84)
2010-06-24 16:35:02 BST: cannot signal 'WAN acceleration process', signal 1, no pid
2010-06-24 16:35:02 BST:  notifying sdxd(102)
2010-06-24 16:35:02 BST: signaling 'Service Deployment System (SDX) process', pid 864, signal 1, status 0 with notification errors enabled
2010-06-24 16:35:02 BST:  notifying l2ald(104)
2010-06-24 16:35:02 BST: signaling 'Layer 2 address flooding and learning process', pid 846, signal 1, status 0 with notification errors enabled
2010-06-24 16:35:02 BST:  notifying mcsnoopd(108)
2010-06-24 16:35:02 BST: signaling 'Multicast Snooping process', pid 863, signal 1, status 0 with notification errors enabled
2010-06-24 16:35:02 BST:  notifying eswd(113)
2010-06-24 16:35:02 BST: signaling 'Ethernet Switching Process', pid 865, signal 1, status 0 with notification errors enabled
2010-06-24 16:35:02 BST: Rotate backup configs
2010-06-24 16:35:06 BST: commit complete
commit complete


Any ideas?
--
Nick Ryce
Network Engineer
Lumison
08451199999

P.S. do you love Lumison?  Why not take a moment and vote for us?
http://bit.ly/Vote_Lumison


________________________________
--

This email and any files transmitted with it are confidential and intended
solely for the use of the individual or entity to whom they are addressed.
If you have received this email in error please notify the sender. Any
offers or quotation of service are subject to formal specification.
Errors and omissions excepted. Please note that any views or opinions
presented in this email are solely those of the author and do not
necessarily represent those of Lumison.
Finally, the recipient should check this email and any attachments for the
presence of viruses. Lumison accept no liability for any
damage caused by any virus transmitted by this email.


More information about the juniper-nsp mailing list