[j-nsp] unabel to archive to ftp
Nick Ryce
Nick.Ryce at lumison.net
Mon Jun 28 16:20:23 EDT 2010
Hi Thomas,
Its on a j2320 9.6R3.8
Nick
-----Original Message-----
From: Thomas Eichhorn [mailto:te at te3networks.de]
Sent: 25 June 2010 08:08
To: Nick Ryce
Cc: juniper-nsp at puck.nether.net
Subject: Re: [j-nsp] unabel to archive to ftp
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
What is about this in show log messages?
Usually the router logs what he has done or if not what has gone wrong...
What is your platform and release you are trying this?
Tom
Am 24.06.2010 17:42, schrieb Nick Ryce:
> Hi Guys,
>
> I have transfer-on-commit to an ftp site bit it just doesn't seem to
> work. The username and password have been tested as working
>
> archival {
> configuration {
> transfer-on-commit;
> archive-sites {
> "ftp://xxx:yyy@ftp.domain.com/juniper/";
> }
> }
>
> When running the commit with | display detail is does not look like it
> is trying to connect. Im running 9.6R3.8
>
> Below is the output of the commit
>
> 2010-06-24 16:34:58 BST: no commit script changes
> 2010-06-24 16:34:58 BST: no transient commit script changes
> 2010-06-24 16:34:58 BST: finished loading commit script changes
> 2010-06-24 16:34:58 BST: exporting juniper.conf
> 2010-06-24 16:34:58 BST: expanding groups
> 2010-06-24 16:34:58 BST: finished expanding groups
> 2010-06-24 16:34:58 BST: setup foreign files
> 2010-06-24 16:34:58 BST: update license counters
> 2010-06-24 16:34:58 BST: finish license counters
> 2010-06-24 16:34:58 BST: propagating foreign files
> 2010-06-24 16:34:58 BST: complete foreign files
> 2010-06-24 16:34:58 BST: dropping unchanged foreign files
> 2010-06-24 16:34:58 BST: executing 'ffp propagate'
> 2010-06-24 16:34:58 BST: daemons checking new configuration
> 2010-06-24 16:34:58 BST: Routing protocols process checking new
> configuration
> 2010-06-24 16:34:58 BST: IPSec Key Management daemon checking new
> configuration
> 2010-06-24 16:34:58 BST: Interface control process checking new
> configuration
> 2010-06-24 16:34:58 BST: Management Information Base II process
> checking new configuration
> 2010-06-24 16:34:58 BST: Virtual Router Redundancy Protocol process
> checking new configuration
> 2010-06-24 16:34:58 BST: Packet Forwarding Engine management process
> checking new configuration
> 2010-06-24 16:34:58 BST: Traffic sampling control process checking new
> configuration
> 2010-06-24 16:34:59 BST: Port forwarding process checking new
> configuration
> 2010-06-24 16:34:59 BST: Dynamic Host Configuration Protocol process
> checking new configuration
> 2010-06-24 16:34:59 BST: Redundancy interface management process
> checking new configuration
> 2010-06-24 16:34:59 BST: Connectivity fault management process
> checking new configuration
> 2010-06-24 16:34:59 BST: Dial-Out On Demand process checking new
> configuration
> 2010-06-24 16:34:59 BST: Integrated Services Digital Network process
> checking new configuration
> 2010-06-24 16:34:59 BST: Autoinstallation process checking new
> configuration
> 2010-06-24 16:34:59 BST: Network security daemon checking new
> configuration
> 2010-06-24 16:34:59 BST: WAN acceleration process checking new
> configuration
> 2010-06-24 16:34:59 BST: Layer 2 address flooding and learning process
> checking new configuration
> 2010-06-24 16:34:59 BST: Multicast Snooping process checking new
> configuration
> 2010-06-24 16:34:59 BST: Ethernet Switching Process checking new
> configuration
> 2010-06-24 16:34:59 BST: commit wrapup...
> 2010-06-24 16:34:59 BST: activating '/var/etc/keyadmin.conf'
> 2010-06-24 16:34:59 BST: activating '/var/etc/ifinfo.conf'
> 2010-06-24 16:34:59 BST: activating '/var/etc/certs'
> 2010-06-24 16:34:59 BST: activating '/var/etc/cosd.conf.id'
> 2010-06-24 16:34:59 BST: executing foreign_commands
> 2010-06-24 16:34:59 BST: /bin/sh /etc/rc.ui ui_setup_users (sh)
> 2010-06-24 16:34:59 BST: executing ui_commit in rc.ui
> 2010-06-24 16:35:02 BST: executing 'ffp activate'
> 2010-06-24 16:35:02 BST: copying configuration to juniper.save
> 2010-06-24 16:35:02 BST: activating '/var/run/db/juniper.data'
> 2010-06-24 16:35:02 BST: notifying daemons of new configuration
> 2010-06-24 16:35:02 BST: notifying rpd(2)
> 2010-06-24 16:35:02 BST: signaling 'Routing protocols process', pid
> 845, signal 1, status 0 with notification errors enabled
> 2010-06-24 16:35:02 BST: notifying kmd(8)
> 2010-06-24 16:35:02 BST: signaling 'IPSec Key Management daemon', pid
> 853, signal 1, status 0 with notification errors enabled
> 2010-06-24 16:35:02 BST: notifying dcd(12)
> 2010-06-24 16:35:02 BST: signaling 'Interface control process', pid
> 872, signal 1, status 0 with notification errors enabled
> 2010-06-24 16:35:02 BST: notifying mib2d(14)
> 2010-06-24 16:35:02 BST: signaling 'Management Information Base II
> process', pid 870, signal 1, status 0 with notification errors enabled
> 2010-06-24 16:35:02 BST: notifying vrrpd(16)
> 2010-06-24 16:35:02 BST: cannot signal 'Virtual Router Redundancy
> Protocol process', signal 1, no pid
> 2010-06-24 16:35:02 BST: notifying pfed(18)
> 2010-06-24 16:35:02 BST: signaling 'Packet Forwarding Engine
> management process', pid 869, signal 1, status 0 with notification
> errors enabled
> 2010-06-24 16:35:02 BST: notifying sampled(21)
> 2010-06-24 16:35:02 BST: signaling 'Traffic sampling control process',
> pid 847, signal 1, status 0 with notification errors enabled
> 2010-06-24 16:35:02 BST: notifying fud(28)
> 2010-06-24 16:35:02 BST: cannot signal 'Port forwarding process',
> signal 1, no pid
> 2010-06-24 16:35:02 BST: notifying dhcpd(38)
> 2010-06-24 16:35:02 BST: cannot signal 'Dynamic Host Configuration
> Protocol process', signal 1, no pid
> 2010-06-24 16:35:02 BST: notifying cfmd(49)
> 2010-06-24 16:35:02 BST: cannot signal 'Connectivity fault management
> process', signal 1, no pid
> 2010-06-24 16:35:02 BST: notifying jdhcpd(50)
> 2010-06-24 16:35:02 BST: cannot signal 'Dynamic Host Configuration
> Protocol process', signal 1, no pid
> 2010-06-24 16:35:02 BST: notifying dood(73)
> 2010-06-24 16:35:02 BST: cannot signal 'Dial-Out On Demand process',
> signal 1, no pid
> 2010-06-24 16:35:02 BST: notifying isdnd(74)
> 2010-06-24 16:35:02 BST: cannot signal 'Integrated Services Digital
> Network process', signal 1, no pid
> 2010-06-24 16:35:02 BST: notifying tgmd(75)
> 2010-06-24 16:35:02 BST: signaling 'Telephony Gateway Module process',
> pid 829, signal 1, status 0 with notification errors enabled
> 2010-06-24 16:35:02 BST: notifying autod(76)
> 2010-06-24 16:35:02 BST: cannot signal 'Autoinstallation process',
> signal 1, no pid
> 2010-06-24 16:35:02 BST: notifying nsd(78)
> 2010-06-24 16:35:02 BST: signaling 'Network security daemon', pid 866,
> signal 1, status 0 with notification errors enabled
> 2010-06-24 16:35:02 BST: notifying wxd(84)
> 2010-06-24 16:35:02 BST: cannot signal 'WAN acceleration process',
> signal 1, no pid
> 2010-06-24 16:35:02 BST: notifying sdxd(102)
> 2010-06-24 16:35:02 BST: signaling 'Service Deployment System (SDX)
> process', pid 864, signal 1, status 0 with notification errors enabled
> 2010-06-24 16:35:02 BST: notifying l2ald(104)
> 2010-06-24 16:35:02 BST: signaling 'Layer 2 address flooding and
> learning process', pid 846, signal 1, status 0 with notification
> errors enabled
> 2010-06-24 16:35:02 BST: notifying mcsnoopd(108)
> 2010-06-24 16:35:02 BST: signaling 'Multicast Snooping process', pid
> 863, signal 1, status 0 with notification errors enabled
> 2010-06-24 16:35:02 BST: notifying eswd(113)
> 2010-06-24 16:35:02 BST: signaling 'Ethernet Switching Process', pid
> 865, signal 1, status 0 with notification errors enabled
> 2010-06-24 16:35:02 BST: Rotate backup configs
> 2010-06-24 16:35:06 BST: commit complete commit complete
>
>
> Any ideas?
> --
> Nick Ryce
> Network Engineer
> Lumison
> 08451199999
>
> P.S. do you love Lumison? Why not take a moment and vote for us?
> http://bit.ly/Vote_Lumison
>
>
> ________________________________
> --
>
> This email and any files transmitted with it are confidential and
> intended solely for the use of the individual or entity to whom they are addressed.
> If you have received this email in error please notify the sender. Any
> offers or quotation of service are subject to formal specification.
> Errors and omissions excepted. Please note that any views or opinions
> presented in this email are solely those of the author and do not
> necessarily represent those of Lumison.
> Finally, the recipient should check this email and any attachments for
> the presence of viruses. Lumison accept no liability for any damage
> caused by any virus transmitted by this email.
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
iEYEARECAAYFAkwkVdYACgkQrUvjMoak8Zf1MQCdF7LB1+Tg+Lfi5m2jm5UdP7i1
/84Aniu1iI56j2S1XXSI1I0h1pbIreFt
=FHvM
-----END PGP SIGNATURE-----
--
This email and any files transmitted with it are confidential and intended
solely for the use of the individual or entity to whom they are addressed.
If you have received this email in error please notify the sender. Any
offers or quotation of service are subject to formal specification.
Errors and omissions excepted. Please note that any views or opinions
presented in this email are solely those of the author and do not
necessarily represent those of Lumison.
Finally, the recipient should check this email and any attachments for the
presence of viruses. Lumison accept no liability for any
damage caused by any virus transmitted by this email.
More information about the juniper-nsp
mailing list