[j-nsp] Strange IS-IS Problem
Eric Van Tol
eric at atlantech.net
Sun Mar 7 05:42:22 EST 2010
> From: Derick Winkworth [mailto:dwinkworth at att.net]
> Sent: Sunday, March 07, 2010 1:26 AM
> To: Eric Van Tol; Juniper-Nsp
> Subject: Re: [j-nsp] Strange IS-IS Problem
>
> If its JUNOS, then just configure the MTU normally in the interface
> config on the switch.
It does not run JUNOS and there is no config option for MTU that I can find. I don't believe that it's configurable, but it "just works". Without configuring anything on the EX2500, I was able to pass 2000-byte sized IP packets between the Junipers.
-evt
More information about the juniper-nsp
mailing list