[j-nsp] ISG 1000

[Barny Sanchez]

Yes, no problems supporting all of this.

Thanks,



Barny Sanchez | Consulting Engineer - Security Solutions | Juniper Networks  |  Direct: +1.774.318.9140 | barnys at juniper.net <mailto:barnys at juniper.net>
(Message sent via my mobile device, sorry for any typos and shortness of my response)

----- Original Message -----
From: juniper-nsp-bounces at puck.nether.net <juniper-nsp-bounces at puck.nether.net>
To: juniper-nsp at puck.nether.net <juniper-nsp at puck.nether.net>
Sent: Sun Mar 07 10:02:29 2010
Subject: [j-nsp] ISG 1000

Hi

I have got a ISG 1000 firewall which has the default 4 interfaces, i need to
configure 4 zones on a single interface and 1 zone which is the untrusted
zone on another interface , the other 2 interfaces will be used for HA and
heartbeat as there are 2 ISG 1000 my point is

   - can i have 4 different zones on a single interface these are all
   trusted (inside) and require to communicate with one another and also with
   the outside interface
   - can the DMZ zone and the trusted zone be binded with the same interface
   (sub-interfaces are proposed using vlan tagging)

will this type of solution work.
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp