[j-nsp] Prefer RIP Neighbor

[Stefan Fouant]

Are you setting the metric-in statement at the global level or the neighbor level?

Stefan Fouant
------Original Message------
From: Shane Ronan
To: Stefan Fouant
Cc: 'Juniper Puck'
Subject: Re: [j-nsp] Prefer RIP Neighbor
Sent: Mar 11, 2010 7:32 PM

I did, and it seems to set the metric on the route, regardless of  
interface.

On Mar 11, 2010, at 9:28 PM, Stefan Fouant wrote:

>> -----Original Message-----
>> From: juniper-nsp-bounces at puck.nether.net [mailto:juniper-nsp-
>> bounces at puck.nether.net] On Behalf Of Shane Ronan
>> Sent: Thursday, March 11, 2010 4:53 PM
>> To: Juniper Puck
>> Subject: [j-nsp] Prefer RIP Neighbor
>>
>> Hello list,
>>
>> I have exhausted all of my capabilities to figure out the answer to
>> this question, so I am hoping you can help.
>>
>> I have two connections to the same network, which both provide me
>> routes via RIP for Multicast sources.
>>
>> Is there a way for me to prefer the routes I receive via one of the
>> connections over there other?
>
> Real stupid question, but did you try the metric-in statement to  
> adjust the
> metric for the route from one of the neighbors, assuming both  
> neighbors are
> not on the same interface...
>
> Stefan Fouant, CISSP, JNCIE-M/T
> www.shortestpathfirst.net
> GPG Key ID: 0xB5E3803D
>



Sent from my Verizon Wireless BlackBerry