[j-nsp] Prefer RIP Neighbor

[Stefan Fouant]

Show us your config for 'protocols rip'.

Stefan Fouant
------Original Message------
From: Shane Ronan
To: sfouant at shortestpathfirst.net
Cc: 'Juniper Puck'
Subject: Re: [j-nsp] Prefer RIP Neighbor
Sent: Mar 11, 2010 7:53 PM

Neighbor level, this is not at all how I expected it to behave.

On Mar 11, 2010, at 9:45 PM, Stefan Fouant wrote:

> Are you setting the metric-in statement at the global level or the  
> neighbor level?
>
> Stefan Fouant
> ------Original Message------
> From: Shane Ronan
> To: Stefan Fouant
> Cc: 'Juniper Puck'
> Subject: Re: [j-nsp] Prefer RIP Neighbor
> Sent: Mar 11, 2010 7:32 PM
>
> I did, and it seems to set the metric on the route, regardless of
> interface.
>
> On Mar 11, 2010, at 9:28 PM, Stefan Fouant wrote:
>
>>> -----Original Message-----
>>> From: juniper-nsp-bounces at puck.nether.net [mailto:juniper-nsp-
>>> bounces at puck.nether.net] On Behalf Of Shane Ronan
>>> Sent: Thursday, March 11, 2010 4:53 PM
>>> To: Juniper Puck
>>> Subject: [j-nsp] Prefer RIP Neighbor
>>>
>>> Hello list,
>>>
>>> I have exhausted all of my capabilities to figure out the answer to
>>> this question, so I am hoping you can help.
>>>
>>> I have two connections to the same network, which both provide me
>>> routes via RIP for Multicast sources.
>>>
>>> Is there a way for me to prefer the routes I receive via one of the
>>> connections over there other?
>>
>> Real stupid question, but did you try the metric-in statement to
>> adjust the
>> metric for the route from one of the neighbors, assuming both
>> neighbors are
>> not on the same interface...
>>
>> Stefan Fouant, CISSP, JNCIE-M/T
>> www.shortestpathfirst.net
>> GPG Key ID: 0xB5E3803D
>>
>
>
>
> Sent from my Verizon Wireless BlackBerry



Sent from my Verizon Wireless BlackBerry