[j-nsp] local switching l2circuit not passing traffic
andy at inetc.co.uk
Fri Mar 12 10:53:06 EST 2010
David Coulson wrote:
> Is there an alternative method of doing this without having consistent
> VLAN IDs?
> On 3/12/2010 9:44 AM, Andy Harding wrote:
>> The VLAN numbers at both ends of the l2circuit need to be the same for
>> it to work.
>> This is a very poorly documented limitation of the l2circuit feature.
I believe if you have the IQ SFP PICs you can use the VLAN rewriting
features to accomplish what you need. However, I'm not lucky enough to
have any of these PICs and haven't been able to try it out.
Internet Connections Ltd
Phone: 020 7531 5655
Mobile: 07813 975 459
Fax: 01538 382596
Email: andy at inetc.co.uk
More information about the juniper-nsp