[j-nsp] SSG140 - Configure Ethernet ports as switch ports?

[OBrien, Will]

I don't have any 140s but usually you can create a bridge group and  
put the interfaces in it.

Will O'Brien

On Mar 17, 2010, at 12:49 PM, "TCIS List Acct" <listacct at tulsaconnect.com 
 > wrote:

> Is it possible in a SSG-140 to configure a few of the Ethernet  
> interfaces as a
> L2 segment/VLAN to emulate a switch, but also have L3 functions  
> (firewall rules,
> MIPs, etc) work for hosts in that L2 segment? (without having the  
> device in
> transparent mode)
>
> TIA.
>
> --Mike
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp