[j-nsp] LLDP between cisco and juniper

chrisccnpspam2 at gmail.com chrisccnpspam2 at gmail.com
Thu Mar 25 13:53:17 EDT 2010

Ived tested this with a 3750 in my lab connected to a MX480 and an EX4200.   From what I remember it functions both ways. I am used gige. I will very and get back to you. 

I am testing 9.6R3.8 on both Juniper and 12.2(50)SE3 on the 3750. 

------Original Message------
From: Philip Palanchi
Sender: juniper-nsp-bounces at puck.nether.net
To: juniper-nsp
Subject: [j-nsp] LLDP between cisco and juniper
Sent: Mar 25, 2010 12:50 PM

I have enabled LLDP between several mx240's JUNOS 9.6R1.13 with DPCE-R-20GE-2XGE and several cisco 6506's.  LLDP works fine in both directions for anything connected by a 10G interface.  None of the mx240's sees the cisco LLDP neighbor connected by 1GE interface.  However, the cisco's see the mx240's.  All I see are errors as below.  Has anyone else had this problem?

me at mx240> show lldp statistics    
Interface  Received  Unknown TLVs  With Errors  Discarded TLVs  Transmitted  Untransmitted
ge-2/0/0   0         0             43589        43589           43375        0       
ge-2/1/0   0         0             45611        45611           45386        0       
xe-2/2/0   43898     0             0            0               43900        572     
xe-2/3/0   45611     0             0            0               45386        0

juniper-nsp mailing list juniper-nsp at puck.nether.net

Sent via BlackBerry by AT&T

More information about the juniper-nsp mailing list