[j-nsp] JunOS temperature readings

[Alex]

Hello there,
Are you using SMARTS?
If yes please check the thresholds set in SMARTS itself, it may be too low. 
I saw them set at 37 deg C which is "mild fever" in human terms but hardly 
alarming for modern hardware.
If it not possible to set the temp thresholds in JUNOS.
Regards
Alex

----- Original Message ----- 
From: "Jimmy Stewpot" <mailers at oranged.to>
To: <juniper-nsp at puck.nether.net>
Sent: Friday, March 26, 2010 4:32 AM
Subject: [j-nsp] JunOS temperature readings


> Hello,
>
> I am currently looking into an issue where we are getting temperature 
> alerts on a variety of different JunOS devices within one of our 
> facilities. Unfortunately when I go to track down the changes all the 
> switches are running at under 40c which is within the thresholds yet we 
> still get alerts.
>
> jstewpot at JunOS Switch> show chassis temperature-thresholds
>                           Fan speed        Yellow alarm         Red alarm
> Item                     Normal   High    Normal   Bad fan    Normal   Bad 
> fan
> FPC 0 CPU                    60     70        80        70        95 
> 85
> FPC 0 EX-PFE1                60     70        80        70        95 
> 85
> FPC 0 EX-PFE2                60     70        80        70        95 
> 85
> FPC 0 EX-PFE3                60     70        80        70        95 
> 85
> FPC 0 GEPHY Front Left       60     70        80        70        95 
> 85
> FPC 0 GEPHY Front Middle     60     70        80        70        95 
> 85
> FPC 0 GEPHY Front Right      60     70        80        70        95 
> 85
> FPC 0 Uplink Conn            60     70        80        70        95 
> 85
>
> {master:0}
> jstewpot at JunOS Switch> show chassis environment
> Class Item                           Status     Measurement
> Power FPC 0 Power Supply 0           OK
>      FPC 0 Power Supply 1           OK
> Temp  FPC 0 CPU                      OK         38 degrees C / 100 degrees 
> F
>      FPC 0 EX-PFE1                  OK         39 degrees C / 102 degrees 
> F
>      FPC 0 EX-PFE2                  OK         50 degrees C / 122 degrees 
> F
>      FPC 0 EX-PFE3                  OK         45 degrees C / 113 degrees 
> F
>      FPC 0 GEPHY Front Left         OK         20 degrees C / 68 degrees F
>      FPC 0 GEPHY Front Middle       OK         27 degrees C / 80 degrees F
>      FPC 0 GEPHY Front Right        OK         29 degrees C / 84 degrees F
>      FPC 0 Uplink Conn              OK         28 degrees C / 82 degrees F
> Fans  FPC 0 Fan 1                    OK         Spinning at normal speed
>      FPC 0 Fan 2                    OK         Spinning at normal speed
>      FPC 0 Fan 3                    OK         Spinning at normal speed
>
> {master:0}
>
> jstewpot at JunOS Switch> show chassis alarms
> No alarms currently active
>
> I am interested to know if anyone has anything similar? Also is it 
> possible to set the thresholds?
>
> Regards,
>
> Jimmy Stewpot
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>