[j-nsp] Remove EX-4200 stack member

[Jonathan Looney]

Personally, I would halt the third member ("request system halt member 3"),
then pull the cables, and then change the VC configuration.  But, that is
just my preferred way of doing it.

-Jon

On Tue, Mar 30, 2010 at 10:49 AM, Kevin Wormington <kworm at sofnet.com> wrote:

> I'm running a production stack of 3 EX-4200s using the stacking ports on
> 9.6R1.3.  I would like to remove the 3rd member (no ports in use or
> configured) which is just in line-card mode without effecting the other two.
>  The units were all pre-provisioned.  I'm curious if anyone has attempted
> this and if they just pulled the stacking cables first and then made
> software changes or made software changes and then pulled the cables?
>
> Thanks,
>
> Kevin
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>