[j-nsp] ipv6 routing

[Sean Clarke]

What is your config ?
Are you sure you are setting it right, i.e. check the rib

 >set routing-options rib inet6.0 static route 49::/64 discard


 >show route table inet6
inet6.0: 1 destinations, 1 routes (1 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both

49::/64            *[Static/5] 00:00:07
                       Discard

[edit]
On 3/31/10 9:20 AM, Ramesh Karki wrote:
> Hello all,
>
> Can someone help me why my ipv6 routes is not  activating on intet6.0 table
> ?
>
> Scenario :
>
>   C720x -----L2-Sw----M10i
>
>   Static route from Cisco to M10i Lo0 ip is okay. but static route from M10i
> to 720x Lo0 is not showing on routing table and it is not working. There is
> no problem between p2p connection.
>
> M10i is running with JunOS 9.2.
>
> thank you
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>