[j-nsp] ipv6 routing

[Ramesh Karki]

hello,

I am still waiting the response ..is there anyone have faced the same
problem ??

Thank you,


On Wed, Mar 31, 2010 at 1:51 PM, Ramesh Karki <rameshkarki at gmail.com> wrote:

> Hi,
>
> here is my config :
>
> sh conf int ge-0/0/0
> description " ";
> unit 0 {
>     family inet {
>                 address x.x.193.65/26;
>     }
>     family inet6 {
>         address abcd:3800:1:1::1/64;
>     }
> }
>
> sh conf int lo0
> unit 0 {
>     family inet {
>                 }
>         address x.x.192.1/32;
>     }
>     family inet6 {
>         address abcd:3800::1/128;
>     }
> }
>
> rib inet6.0 {
>     static {
>         route abcd:3800::2/128 next-hop abcd:3800:1:1::2;
>         route abcd:3800::4/128 next-hop abcd:3800:2:1::2;
>
> here, abcd:3800:1:1::2 is neighbor (P2P) ip of 72xx router and
> abcd:3800::2/128 is lo0 ip.
>
> The command > show route table inet6.0  only shows the direct and connected
> route.
>
> thank you,
>
>
> On Wed, Mar 31, 2010 at 1:36 PM, Mark Tinka <mtinka at globaltransit.net>wrote:
>
>> On Wednesday 31 March 2010 03:20:28 pm Ramesh Karki wrote:
>>
>> >  Static route from Cisco to M10i Lo0 ip is okay. but
>> >  static route from M10i to 720x Lo0 is not showing on
>> >  routing table and it is not working. There is no problem
>> >  between p2p connection.
>>
>> Can we take a quick peek at your static routing
>> configuration?
>>
>> Cheers,
>>
>> Mark.
>>
>
>