[j-nsp] ipv6 routing
tony at lava.net
Wed Mar 31 15:18:32 EDT 2010
On Wednesday 31 March 2010 03:20:28 pm Ramesh Karki wrote:
> Static route from Cisco to M10i Lo0 ip is okay. but
> static route from M10i to 720x Lo0 is not showing on
> routing table and it is not working. There is no problem
> between p2p connection.
Are you sure the Cisco is announcing the loopback address to the M10?
You may want try adding 'redistribute connected' in the appropriate IGP
part of your Cisco config.
e-mail/xmpp: tony at lava.net
More information about the juniper-nsp