[j-nsp] MPC-3D-16XGE-SFPP on MX960
Sean Clarke
sean1207 at gmail.com
Tue May 4 02:40:32 EDT 2010
Hi Michael
You cannot mix MPC and DPC in the same chassis before 10.2, so you'll
need either to upgrade to 10.2 (which is in beta) or remove the DPC in
slot 1
You *should* also have upgraded the fan trays
cheers
Sean
On 5/4/10 8:25 AM, Michael Phung wrote:
> Hey Guys,
>
> We just tired installing a MPC-3D-16XGE-SFPP on a MX960 running
> 10.0R2.10 on slot 0 and got a error "FPC 0 misconfigured". After this
> message, any attempt to "online" the FPC just fails with the same
> message again. The output of "show chassis fpc" shows the following;
>
> Temp CPU Utilization (%) Memory Utilization (%)
> Slot State (C) Total Interrupt DRAM (MB) Heap Buffer
> 0 Offline ---FPC misconfiguration---
> 1 Online 28 12 0 1024 23 33
>
>
> Anyone else encounter this problem before? This is occurring on 2
> separate cards on different routers, so I don't think the cards are
> faulty.
>
> Any help would be greatly appreciated!
>
> Thanks,
>
> Michael
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>
More information about the juniper-nsp
mailing list