[j-nsp] MPC-3D-16XGE-SFPP on MX960

[Michael Phung]

Ahh now that makes sense. Yes the other card is a DPC card.

In order to correct this, I'll have to migrate our connections the MPC
card. Do you know if a reload is required or can I just pull the DPCs
and online the MPC?

Thanks,

Michael

On Tue, May 4, 2010 at 2:46 AM, Richard A Steenbergen <ras at e-gerbil.net> wrote:
> On Tue, May 04, 2010 at 02:25:16AM -0400, Michael Phung wrote:
>> Hey Guys,
>>
>> We just tired installing a MPC-3D-16XGE-SFPP on a MX960 running
>> 10.0R2.10 on slot 0 and got a error "FPC 0 misconfigured". After this
>> message, any attempt to "online" the FPC just fails with the same
>> message again. The output of "show chassis fpc" shows the following;
>>
>>                      Temp  CPU Utilization (%)   Memory    Utilization (%)
>> Slot State            (C)  Total  Interrupt      DRAM (MB) Heap     Buffer
>>   0  Offline         ---FPC misconfiguration---
>>   1  Online            28     12          0       1024       23         33
>>
>>
>> Anyone else encounter this problem before? This is occurring on 2
>> separate cards on different routers, so I don't think the cards are
>> faulty.
>
> Is the other card in the chassis a trio card as well? You can't mix trio
> and non-trio cards until 10.2, and you can't run the MPC/MIC cards until
> 10.1.
>
> --
> Richard A Steenbergen <ras at e-gerbil.net>       http://www.e-gerbil.net/ras
> GPG Key ID: 0xF8B12CBC (7535 7F59 8204 ED1F CC1C 53AF 4C41 5ECA F8B1 2CBC)
>