[j-nsp] Multicast Streaming Simulation

[gün gökçearslan]

Hi Wala
You can setup virtual lab  with gns3/dynamips simulation software. And you
can use Juniper and Cisco ios for testing
environment, and you can connect ip topology with VMware virtual machines
and start multicast streaming with vlc 0.8.6 version

Or if you have a real lab , you can just use vlc 0.8.6 version. you
will start streaming with vlc stream wizard --> "rtp multicast"
and you will get the stream with network-->udp/rtp multicast (multicast
address)

if you have any problem, feel  free to send email
On Sat, May 8, 2010 at 12:37 AM, Tomasz Opala <tomasz.tom at gmail.com> wrote:

> Hi Walaa,
>
> try VideoLAN - free streaming application.
>
> Regards,
> Tomasz
>
> On Fri, May 7, 2010 at 9:05 PM, Walaa Abdel razzak <walaaez at bmc.com.sa
> >wrote:
>
> > Hi Experts
> >
> > Is it possible to generate multicast streaming (simulation) from my
> router
> > to verify multicast configuration? If no, is their any other easy way?
> >
> > Best Regards,
> > Walaa Abdel Razzak
> >
> >
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/juniper-nsp
> >
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>