[j-nsp] static route

Scott T. Cameron routehero at gmail.com
Tue May 18 10:27:28 EDT 2010


What is 192.168.20.2?  Does it know what 202.5.5.5 is?  If yes, does it
allow IP forwarding?



On Tue, May 18, 2010 at 10:10 AM, <jjsyed at aol.com> wrote:

>
>
>
> My customer offered to some customers that utilizes a probe box between the
> CE and PE so to monitor traffic quality and other parameters. This probe box
> has a /32 IP address as a management IP and it can of course be managed via
> out-of-band connections, however customer would like to use in-band
> management to accomplish this task and they can do this as below using Cisco
> gear. The question is if the PE becomes M320 of Juniper, it does not seem to
> work with JUNOS static route command. The current cli command we can
> translate in JUNOS is
>
> routing-instance foo routing-options static route 202.5.5.5/32 next-hop
> 192.168.20.2
>
> We cannot point to the next-hop as the ge- interface name since it is not a
> point-to-point ifl. Does some kind of proxy ARP get involved here?
> Can someone shine some light as whether this is do-able with JUNOS static
> command to accomplish the same or we have to adopt some other methods to do
> this.
>
>
> thanks
>
> jjsyed
>
>
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>


More information about the juniper-nsp mailing list