[j-nsp] l2circuit communities

[Richard A Steenbergen]

On Mon, May 17, 2010 at 10:34:40PM -0400, Truman Boyes wrote:
> Hi Richard, 
> 
> You can likely achieve this a different way, (although you approach
> has interested me to check it out), by using CBF based on communities.

Oh and a word of warning before anybody runs out and tries this, doing
this kind of forwarding-table policy to select specific LSPs seems to
SIGNIFICANTLY increase cpu use, to the point of almost never being < 
100%:

CPU states: 95.3% user,  0.4% nice,  2.7% system,  1.6% interrupt,  0.0% idle
Mem: 1409M Active, 445M Inact, 298M Wired, 321M Cache, 69M Buf, 1031M Free
Swap: 2048M Total, 2048M Free

  PID USERNAME  THR PRI NICE   SIZE    RES STATE    TIME   WCPU COMMAND
 2071 root        1 127    0   991M   975M RUN    192.8H 89.16% rpd

-- 
Richard A Steenbergen <ras at e-gerbil.net>       http://www.e-gerbil.net/ras
GPG Key ID: 0xF8B12CBC (7535 7F59 8204 ED1F CC1C 53AF 4C41 5ECA F8B1 2CBC)