[j-nsp] Encrypt GRE tunnel with ipsec

[Jonathan Looney]

Are you using SRX/J-series or AS PIC/MS PIC/ASM/Services DPC?  The
configuration will be different for those two classes of platform.

-Jon

On Mon, May 24, 2010 at 8:44 AM, Nick Ryce <Nick.Ryce at lumison.net> wrote:

> Hi Guys,
>
> Is there a way to set up a gre tunnel and then encrypt gre packets with
> ipsec?  I know it can be done on a cisco but the juniper kb makes my eyes
> bleed trying to find anything.
>
> I found the following config here
> http://communities.juniper.net/jnet/attachments/jnet/srx/509/1/gre-ipsec-srx240.txtbut dont think that would encrypt everything going down the tunnel....or
> would it.
>
> Im using 9.6 at the moment.
>
> Any help appreciated
>
> --
> Nick Ryce
> Network Engineer
> Lumison
> 08451199999
>
> P.S. do you love Lumison?  Why not take a moment and vote for us?
> http://bit.ly/Vote_Lumison
>
>
>
>
> --
>
> This email and any files transmitted with it are confidential and intended
> solely for the use of the individual or entity to whom they are addressed.
> If you have received this email in error please notify the sender. Any
> offers or quotation of service are subject to formal specification.
> Errors and omissions excepted.  Please note that any views or opinions
> presented in this email are solely those of the author and do not
> necessarily represent those of Lumison.
> Finally, the recipient should check this email and any attachments for the
> presence of viruses.  Lumison accept no liability for any
> damage caused by any virus transmitted by this email.
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>