[j-nsp] IDP8200 Issue -

[Tim Eberhard]

IP monitoring is only available at this time on the high end series SRX's.
It might be in the 3600 depending on the code version. I would test and see.

IP monitoring is track-ip for Junos. If IP monitoring is not available on
your platform or code version there are event scripts that mimic the
track-ip functionality that you can download from juniper's website.

For the event script track-ip see the following document:
http://www.juniper.net/us/en/local/pdf/app-notes/3500168-en.pdf

For IP monitoring configuration this should help:
http://www.juniper.net/techpubs/software/junos-security/junos-security10.1/junos-security-swconfig-security/topic-43676.html

Hopefully this helps,
-Tim Eberhard

On Wed, May 26, 2010 at 7:27 AM, Fahad Khan <fahad.khan at gmail.com> wrote:

> Ah! great... IP monitoring will work, I ll test it and see..
>
>
> Thanks Scott.
>
> Tim, can you explain how can we do Track-IP on SRX?? or u meant the same
> thing as scott??
>
> regards,
>
> Muhammad Fahad Khan
> JNCIP - M/T # 834
> IT Specialist
> Global Technology Services, IBM
> fahad at pk.ibm.com
> +92-321-2370510
> +92-301-8247638
> Skype: fahad-ibm
> http://www.linkedin.com/in/muhammadfahadkhan
> http://fahad-internetworker.blogspot.com
> http://www.visualcv.com/g46ptnd
>
>
> On Wed, May 26, 2010 at 4:53 PM, Scott T. Cameron <routehero at gmail.com
> >wrote:
>
> > set chassis cluster redundancy-group # ip-monitoring
> >
> > As with all things, YMMV.
> >
> >
> > On Wed, May 26, 2010 at 7:40 AM, Tim Eberhard <xmin0s at gmail.com> wrote:
> >
> > > You could always run trackip on the SRX to monitor the path to the
> > switch.
> > > Pinging a L3 interface on the core switch itself.
> > >
> > > Hope this helps
> > >
> > > -Tim Eberhard
> > >
> > >
> > > On May 26, 2010, at 6:27 AM, Fahad Khan <fahad.khan at gmail.com> wrote:
> > >
> > >  Dear Folks,
> > >>
> > >> I am just shocked to know that IDP8200 does not support Peer Port
> > >> Modulation
> > >> for 10 gig links.
> > >>
> > >> Does any one know, how can I failover my Firewall properly if the link
> > >> between Core Switch and IDP is down
> > >>
> > >> the diagram is
> > >>
> > >>   SRX3600---HA-------SRX3600
> > >>         |                          |
> > >>    IDP8200                IDP8200
> > >>         |                          |
> > >>     ------Core -----Switch------
> > >>
> > >>
> > >> Awaiting for quick response
> > >>
> > >> Muhammad Fahad Khan
> > >> JNCIP - M/T # 834
> > >> IT Specialist
> > >> Global Technology Services, IBM
> > >> fahad at pk.ibm.com
> > >> +92-321-2370510
> > >> +92-301-8247638
> > >> Skype: fahad-ibm
> > >> http://www.linkedin.com/in/muhammadfahadkhan
> > >> http://fahad-internetworker.blogspot.com
> > >> http://www.visualcv.com/g46ptnd
> > >> _______________________________________________
> > >> juniper-nsp mailing list juniper-nsp at puck.nether.net
> > >> https://puck.nether.net/mailman/listinfo/juniper-nsp
> > >>
> > > _______________________________________________
> > > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > > https://puck.nether.net/mailman/listinfo/juniper-nsp
> > >
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/juniper-nsp
> >
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>