[j-nsp] JunOS 10.0R3 MX960 (DPC's only)

Richard A Steenbergen ras at e-gerbil.net
Mon Nov 1 19:26:44 EDT 2010


On Sun, Oct 31, 2010 at 08:10:55PM -0400, Paul Stewart wrote:
> Greetings..
> 
> We've had 10.0R3.10 running on MX platform with DPC cards for 172 days 
> now with no issues to speak of.  BGP, IPv6, OSPF....

IIRC it was pretty darn buggy (on MX) for us... Off the top of my head I 
can think of multiple MPLS issues, an NSR issue, and an ISIS overload 
state that would sometimes kick on and refuse to clear (turned out to be 
related to having prefix-export-limit configured, even if you were 
nowhere near the limit), which made us roll back our only attempt to 
deploy that code. I'm sure there would have been more if we had kept 
looking. :)

The reality is that there are probably a good 20+ serious issues like 
these in every release, but if you run a very simple network (or in some 
cases, aren't observant enough to notice that something has broken :P) 
you may be able to skate by without running into any of them. I on the 
other hand, end up trying to collect them all. :)

-- 
Richard A Steenbergen <ras at e-gerbil.net>       http://www.e-gerbil.net/ras
GPG Key ID: 0xF8B12CBC (7535 7F59 8204 ED1F CC1C 53AF 4C41 5ECA F8B1 2CBC)


More information about the juniper-nsp mailing list