[j-nsp] EX 10.0S10.1

Bill Blackford BBlackford at nwresd.k12.or.us
Wed Nov 17 16:43:34 EST 2010


I found it in  Bulletin PSN-2010-11-992. I get the email notifications and this was linked in it.

-b

From: Keegan Holley [mailto:keegan.holley at sungard.com]
Sent: Wednesday, November 17, 2010 1:39 PM
To: Bill Blackford
Cc: juniper-nsp at puck.nether.net
Subject: Re: [j-nsp] EX 10.0S10.1


On Tue, Nov 16, 2010 at 4:44 PM, Bill Blackford <BBlackford at nwresd.k12.or.us<mailto:BBlackford at nwresd.k12.or.us>> wrote:
So I recently updated almost everything to 10.0R4.7 (I still have some stuff on 10.0S1.1). I'm not experiencing any issues, that I'm aware of. I would like to see the IGMP snooping issues ironed out, but for the most part, I'm content.

My question is should I wait 'til the next recommended release, or is there a compelling reason I should update everything again, now? I am a little concerned about the [PR/546674 EX4200 Virtual Chassis problem not passing traffic] issue.
Do you have more info on this bug?  I searched the PR database but the bug with that ID only lists the following.




JUNOS PROBLEM REPORT NUMBER : 546674



JUNOS Problem Report Information


NUMBER


546674


SEVERITY


critical


CATEGORY


sw


STATE


open


SYNOPSIS


pfem core 0x018f599c in nh_composite_add (nh_params=0x9068ed48, nh=0x906d6bb8)


ARRIVAL DATE


2010-08-24 23:29:04


LAST MODIFIED


2010-11-11 18:10:22


CLOSE DATE


-


RELEASE NOTE


The PFE core-dump may happen due to the case of having non-existent l2 unicast-nh. This core dump will not be seen with the fix.








More information about the juniper-nsp mailing list