[j-nsp] Filtering RIB -> FIB Routes
lawrencewong72 at yahoo.com
Sun Nov 21 20:02:58 EST 2010
I'm new to JUNOS and would like to enquire if it's possible to filter routes
found in the RIB from going onto the FIB? This is on a J4350 box running
10.3R1.9 in Packet Mode (MPLS configured and enabled).
The RIB routes are a mixture of BGP, OSPF and STATIC routes. And in particular a
scenario whereby I do not want the BGP routes received in a virtual routing
instance from being exported to the FIB.
Googling has almost no results other than the following earlier thread. But the
commands seems wrong (i.e. forwarding-options requires a "firewall" filter but
the example used a policy-statement instead).
I've been trying hard but to no avail and is wondering if anyone has better luck
than me and has experience to share?
More information about the juniper-nsp