[j-nsp] Egress Policing / Layer2

[Nick Ryce]

Did anyone ever get this resolved as we are facing the same issue.

Nick

-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Paul Stewart
Sent: 11 August 2010 00:52
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] Egress Policing / Layer2

Hi there.



I haven't had time to lab this up due to travelling but we are trying to find a way to do egress policing on an EX switch for VLAN's - is there a such thing?  I understand there is ingress policing?



These are EX4200 switches primarily where a LAN service comes in one port and leaves on another  (same switch) - any suggestions/hacks are welcome..



Thanks,



Paul







_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp

--

This email and any files transmitted with it are confidential and intended
solely for the use of the individual or entity to whom they are addressed.
If you have received this email in error please notify the sender. Any
offers or quotation of service are subject to formal specification.
Errors and omissions excepted.  Please note that any views or opinions
presented in this email are solely those of the author and do not
necessarily represent those of Lumison.
Finally, the recipient should check this email and any attachments for the
presence of viruses.  Lumison accept no liability for any
damage caused by any virus transmitted by this email.