[j-nsp] Channelised STM-1, into 3 x DS3's.

[Benny Sumitro]

Yes it is supported as it is documented in:
http://www.juniper.net/techpubs/en_US/release-independent/junos/topics/reference/general/pic-m10i-chan-0c3-stm1-iqe.html

<http://www.juniper.net/techpubs/en_US/release-independent/junos/topics/reference/general/pic-m10i-chan-0c3-stm1-iqe.html>But
never hurt to check with your juniper rep :)

Cheers

On Thu, Oct 7, 2010 at 7:21 PM, Rolf Mendelsohn <rolf-web at internet.ao>wrote:

> Hi All,
>
> I just wanted to inquire if anybody had used the following card, to split 1
> x STM-1, into 3 x DS-3's?
>
> PE-2CHOC3-STM1-IQE-SFP
>
>
> I understand from the Cisco website, that the Cisco card (PA-MC-STM-1SMI)
> is not capable of being split into 3 x DS-3's.
>
>
> http://www.cisco.com/en/US/prod/collateral/modules/ps2033/ps2762/product_data_sheet09186a008007d6c0.html
> "Clear channel STM-1, E3, and subrate E3 are not supported."
>
> Thanks,
> Rolf
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>