[j-nsp] STP in EX4200 Virtual Chassis

[Ramesh]

Stacking EX 4500 in VC is not yet supported I believe. Future releases of
software might support VC capability. I might be wrong though..


On Sat, Oct 16, 2010 at 11:39 PM, Fahad Khan <fahad.khan at gmail.com> wrote:

> Dear Rehan
>
> EX4200 switches in VC is an implementation with ISIS protocol, so they
> internally control looping.
>
> Yes, You can use up-link ports (like in case of connecting two switches
> apart of more than 5 meters) of Fiber.
>
> regards,
>
> Muhammad Fahad Khan
> JNCIP - M/T # 834
> IT Specialist
> Global Technology Services, IBM
> fahad at pk.ibm.com
> +92-301-8247638
> Skype: fahad-ibm
> http://pk.linkedin.com/in/muhammadfahadkhan
>
>
> On Sun, Oct 17, 2010 at 11:03 AM, Muhammad Rehan <rehanrehman45 at gmail.com
> >wrote:
>
> > Hi Team,
> >
> >
> > Why Spanning tree is not requried , When we connect Ex4200 Swicthes in
> > Virtual Chassis?
> >
> > Can we connect Ex 4500 switches in Virtual Chassis using Uplink or Base
> SFP
> > modules?
> >
> > Regards
> >
> > Muhammad Rehan
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/juniper-nsp
> >
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>



-- 
B. Ramesh
408-409-4358