[j-nsp] SRX for MPLS

[Giuliano Cardozo Medalha]

People,

Does anyone uses SRX routers for MPLS (VPLS) Transport ?

We are thinking about the use of SRX220 under some conditions:

- Use it in a not a good environment without air conditioning and a lot 
of dust ... external box temperature rises from 35 to 42 Celsius.
- Be the point to interconnect POPs using point to point radios 
(100~1000 Mbps)
- Using it to provide a VPLS infrastructure for L2 transport and client 
isolation until the start of the backbone (M7i and MX80 Routers)
- SRX220 to provide OSPFv2 and OSPFv3 L3 gateway for some routed clients.

The figure showed at the following link tries to resume it at all:

http://www.wztech.com.br/JUNIPER/Topology.png

It is possible to use this box in a such project ?  Do you have any 
experience using it to do this type of topology ?

Is is possible that SRX220 can work fine under so strength environment 
conditions ?  Could it blow up or goes down ?

If someone has implemented this kind of environment can please share the 
experiences ?

Thanks a lot,

Giuliano