[j-nsp] ho to tie 2 VR's together on EX4200

[Doug Marschke]

Thanks!  I wonder why they tease me with the lt knob? ;)

Doug Marschke
Chief Technology Officer
JNCIE-ER #3, JNCIE-M #41, JNCIS-FW, JNCI
(415) 902-5702 (cell)
(415)-358-4059 (fax)
www.proteus.net

-----Original Message-----
From: Alex [mailto:alex.arseniev at gmail.com] 
Sent: Thursday, October 28, 2010 3:25 AM
To: Doug Marschke; juniper-nsp at puck.nether.net
Subject: Re: [j-nsp] ho to tie 2 VR's together on EX4200

Doug,
I think that for lt- interfaces to actually work You need either a T-PIC or 
"set chassis fpc X pic Y tunnel-services" knob and AFAIK neither is 
supported on EX
http://www.juniper.net/techpubs/en_US/junos10.3/topics/reference/statement-h
ierarchy/chassis-ex-series.html
Rgds
Alex

----- Original Message ----- 
From: "Doug Marschke" <doug at proteus.net>
To: <juniper-nsp at puck.nether.net>
Sent: Thursday, October 28, 2010 12:41 AM
Subject: [j-nsp] ho to tie 2 VR's together on EX4200


>I would figure an LT interface like other platforms but it doesn't allow 
>for
> an encapsulation. Ideas?
>
>
>
> {master:0}[edit interfaces lt-0/0/0]
>
> lab at s13# show
>
> unit 0 {
>
>    point-to-point;
>
>    peer-unit 1;
>
>    family inet {
>
>        address 10.1.2.1/30;
>
>    }
>
> }
>
> unit 1 {
>
>    peer-unit 0;
>
>    family inet {
>
>        address 10.1.2.2/30;
>
>    }
>
> }
>
>
>
> {master:0}[edit interfaces lt-0/0/0]
>
> lab at s13# commit
>
> [edit interfaces lt-0/0/0]
>
>  'unit 0'
>
>     encapsulation needs to be configured for logical tunnel interface
>
> error: configuration check-out failed
>
>
>
> {master:0}[edit interfaces lt-0/0/0]
>
> lab at s13# set unit 0 ?
>
> Possible completions:
>
>  <[Enter]>            Execute this command
>
>  accounting-profile   Accounting profile name
>
> + apply-groups         Groups from which to inherit configuration data
>
> + apply-groups-except  Don't inherit configuration data from these groups
>
>  bandwidth            Logical unit bandwidth (informational only)
>
>  description          Text description of interface
>
>  disable              Disable this logical interface
>
>  dlci                 Frame Relay data-link control identifier (1..1022)
>
>> family               Protocol family
>
>  mtu                  Maximum transmission unit packet size (256..9216)
>
>  no-traps             Don't enable SNMP notifications on state changes
>
>  peer-unit            Peer unit number (0..16385)
>
>  point-to-point       Point-to-point connection
>
>  traps                Enable SNMP notifications on state changes
>
>> tunnel               Tunnel parameters
>
>  vlan-id              Virtual LAN identifier value for 802.1q VLAN tags
>
>  |                    Pipe through a command
>
> {
>
>
>
>
>
> lab at s13# run show version
>
> fpc0:
>
> --------------------------------------------------------------------------
>
> Hostname: s13
>
> Model: ex4200-24t
>
> JUNOS Base OS boot [9.5R2.7]
>
> JUNOS Base OS Software Suite [9.5R2.7]
>
> JUNOS Kernel Software Suite [9.5R2.7]
>
> JUNOS Crypto Software Suite [9.5R2.7]
>
> JUNOS Online Documentation [9.5R2.7]
>
> JUNOS Enterprise Software Suite [9.5R2.7]
>
> JUNOS Packet Forwarding Engine Enterprise Software Suite [9.5R2.7]
>
> JUNOS Routing Software Suite [9.5R2.7]
>
> JUNOS Web Management [9.5R2.7]
>
>
>
> {master:0}[edit interfaces lt-0/0/0]
>
>
>
>
>
>
>
> Doug Marschke
>
> Chief Technology Officer
>
> JNCIE-ER #3, JNCIE-M #41, JNCIS-FW, JNCI
>
> (415) 902-5702 (cell)
>
> (415)-358-4059 (fax)
>
> www.proteus.net
>
>
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>