[j-nsp] J series OID/MIB help

[Nick Ryce]

Hi Guys,

Im having some issues rewriting a rpm service check that a previous engineer wrote for an M7i  ( /me waves to Ian ).

The current oid for the m7i checks a probe called Probe1 and a test called ping-manchester.  The oid looks like this

.1.3.6.1.4.1.2636.3.7.1.3.1.20.6.80.114.111.98.101.49.15.112.105.110.103.45.109.97.110.99.104.101.115.116.101.114

When doing an snmpwalk it will return a interger of 1 if the rpm check is successful or another value if failed.

I am trying to find the oid for a J series which does similar.  The rpm prob for the J series looks like this:-

probe Probe1 {
    test EDI {
        probe-type icmp-ping;
        target address 192.168.1.2;
        probe-count 10;
        test-interval 120;

The part describing the probe and test is 80.114.111.98.101.49.3.69.68.73 but I cannot find thethe part of the oid for before this.  I have found somethings which return counter32 and OctetString but not an integer.

Any help would be much appreciated.

Nick
--
Nick Ryce
Network Engineer
Lumison
t: 0845 1199 900
d: +44 131 514 4049

P.S. Fancy some light reading? Clouds to networks, download a Lumison whitepaper now at http://www.lumison.net/why-lumison/whitepapers



________________________________
--

This email and any files transmitted with it are confidential and intended
solely for the use of the individual or entity to whom they are addressed.
If you have received this email in error please notify the sender. Any
offers or quotation of service are subject to formal specification.
Errors and omissions excepted. Please note that any views or opinions
presented in this email are solely those of the author and do not
necessarily represent those of Lumison.
Finally, the recipient should check this email and any attachments for the
presence of viruses. Lumison accept no liability for any
damage caused by any virus transmitted by this email.