[j-nsp] SRX to SRX VPN

[Morten Isaksen]

I had the same problem (between a SRX and a Cisco box).

It is most likely a mismatch between remote-net and local-net
configurations on each router.

Try to enable traceoptions.

edit security ike traceoptions
[edit security ike traceoptions]
set file size 1m
set flag policy-manager
set flag ike
set flag routing-socket
commit

And check the kmd log.

/Morten

On Wed, Sep 15, 2010 at 1:27 PM, Fahad Khan <fahad.khan at gmail.com> wrote:
> Hi folks,
>
> I am trying to establish route based VPN between SRX3600(in Ch cluster) and
> SRX210, but stuck in phase 2 (no proposal chosen)..
>
> has any one experienced it??
>
> thanks in adv
>
> regards,
>
> Muhammad Fahad Khan
> JNCIP - M/T # 834
> IT Specialist
> Global Technology Services, IBM
> fahad at pk.ibm.com
> +92-301-8247638
> Skype: fahad-ibm
> http://pk.linkedin.com/in/muhammadfahadkhan
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>



-- 
Morten Isaksen