[j-nsp] logging cspf/bandwidth reservation failures

[Richard A Steenbergen]

On Thu, Sep 16, 2010 at 04:57:57PM -0700, Ben Bird wrote:
> On Wed, 15 Sep 2010 14:50:58 -0500, Richard A Steenbergen
> <ras at e-gerbil.net> wrote:
> 
> >Is there a way to syslog a cspf or rsvp bandwidth reservation failure? 
> 
> The entry at 18:50:14.895 should be logged by rpd, if syslog config has
> daemon configured for warning or less severe.  The message would be
> similar to the following:
> 
> RPD_MPLS_PATH_BW_NOT_AVAILABLE: Unable to satisfy bandwidth configured
> for MPLS path <pathname> on LSP <lspname>

Hrmmmm... Ok, I see RPD_MPLS_PATH_BW_NOT_AVAILABLE documented as having 
been added (well, renamed) in 8.2, but it's not going into my syslog, 
even on my syslog debug file configured for "any verbose". Have you seen 
this event actually work? 

-- 
Richard A Steenbergen <ras at e-gerbil.net>       http://www.e-gerbil.net/ras
GPG Key ID: 0xF8B12CBC (7535 7F59 8204 ED1F CC1C 53AF 4C41 5ECA F8B1 2CBC)