[j-nsp] Multiple Proxy ID SRX Route based VPN

[Bikash Bhattarai]

Hi Dale,

Its seems great but I cannot  make change on the other side. They use cisco and don't want to make  any changes. Is it possible to do without GRE and Policy Based VPN?  Thanks in advance.


Regards,
Bikash Bhattarai




-----Original Message-----
From: Ben Dale [mailto:bdale at comlinx.com.au] 
Sent: सोमवार, सेप्टेम्बर 20, 2010 6:53 PM
To: Bikash Bhattarai
Cc: juniper-nsp at puck.nether.net
Subject: Re: [j-nsp] Multiple Proxy ID SRX Route based VPN

Hi Bikash,

You may find it easier to configure GRE over IPSEC.  Your proxy-ids then only need to match the GRE tunnel endpoint addresses, and you can then route any traffic you require across the GRE tunnel (which in-turn will be encrypted across the IPSEC tunnel).  

Cheers,

Ben

On 20/09/2010, at 10:49 PM, Bikash Bhattarai wrote:

> Dear all,
> 
> 
> 
> I need a solution on SRX 210 to create  a route based vpn with cisco 
> 1841 with multiple proxy-ids.
> 
> 
> 
> Regards,
> 
> Bikash Bhattarai
> 
> Technical Manager
> 
> Dristi Tech Pvt. Ltd.
> 
> skype: bkbhattarai
> 
> mob:+977-9851039710
> 
> 
> 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net 
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>